The selection, installation, and maintenance of cantilever beam sensors significantly impact their measurement accuracy and lifespan. When selecting a sensor, the range should be chosen based on the project's maximum load, and a 30% safety margin is recommended to avoid overload damage. For dynamic load scenarios, the sensor's fatigue life must be considered. The accuracy class should be selected according to application requirements, such as OIML Class C or D. Accuracy is typically characterized by parameters such as nonlinearity and hysteresis error. For laboratory projects, a 0.05%FS high-precision sensor can be used, while 0.5%FS is sufficient for industrial applications. Environmental factors such as humidity, dust, corrosion, and temperature must be considered when selecting the protection level, such as IP65 or IP67, as well as the material, such as alloy steel or stainless steel. Special materials are required for high-temperature environments (>150 gradd), a dylid defnyddio dur di-staen gyda gorchudd mewn amgylcheddau cyrydol iawn.
Gellir dewis y dull gosod yn unol â gofynion y prosiect, megis tyllau lleoli grisiog, ffitiadau datodadwy, neu ryngwynebau edafedd. Rhaid i'r allbwn signal fod yn gydnaws â'r system gaffael; Mae gan signalau analog alluoedd gwrth-ymyrraeth cryf, tra bod signalau digidol yn addas ar gyfer trosglwyddo pellter hir. Er mwyn cysylltu â chyfrifiadur neu PLC, gellir dewis synhwyrydd digidol gyda thrawsnewidydd analog wedi'i adeiladu i-digidol. I wneud iawn am lwytho oddi ar y canol yn ystod y gosodiad, mae'n well cael synwyryddion sydd â-mewn cydrannau trawsyrru grym pêl ddur neu strwythurau pen pêl dwbl. Mae'r synwyryddion hyn yn dileu-gwallau llwytho oddi ar y ganolfan trwy rhigolau peli a systemau sbring, gan symleiddio gosod a dadfygio.